Details: All the led strips made by Epistar or Huga chips, 5 lumens or more per LED, this kind of Magic flexible LED strips are made to provide a mass of color changing programs, standard length is 5 meters per reel, can be made into 4 meters too. another Magic flexible LED strips is 12V Magic LED strips, the only difference is the input voltage is 12Vot, if you are interesed in it, check it here: 12V Magic LED strips. usually it is made into White PCB and IP 67 waterproof, with Silicon tube Covered the whole LED strips, and sealed with cap at both ends. it can produce hundreds of color changing when equiped with 5V RGB LED controllers. Connection: it is equiped with 2 connectors, one is for power supply, another is for RGB controller. you have to hook the wires up to your 5V power source, and then connect the 5V Magic LED strips with the 5V Magic RGB LED controller. click 5V Magic RGB LED Controller Manual for more connection information of 5V Magic RGB LED controllers. click 5V Magic Flexible LED strips for more information of this Magic RGB LED strips. Packing: 5meter/reel Product width: 18mm PCB width: 15mm LED dimension: 5.0x5.3x1.6mm LED beam angle: 120degree LED quantity: 160LED/reel (32LED/m) Working voltage: 5V DC Power consumption: Max. 48W/reel Max. 9.6W/meter Features: * Apply 3-in-1 5050 RGB SMD LED * Can be cut every 2LED along the cut-mark * Waterproof silicone tube outside, IP67 * Maintain LED long lifetime & color consistency with the microchips * Equiped with 5V Magic RGB LED controllers, it can produce hundreds of patterns of color synchronization, sequence, chasing, rolling, cross fading or strobe effects Application: 1. Cove lighting 2. Architectural lights for canopy, corridor, window, archway 3. Backlight or edge lighting for signage 4. DIY lights for home use 5. Path and contour marking 6. Decorative lights for holiday, event, show, exhibition |