Details: Traditional Ribbon LED Strips have the LED's facing and shining straight 'up' from the circuit board. With the Side Emitting Ribbon LED Strip, the LED shines parallel with the circuit board, allowing you to outline edges or spaces where a normal LED Strip would be unable to reach. The Side Emitting LED Strip can be made into fully waterproof or non waterproof too, and has high quality 3M adhesive already attached for a seamless install. All the led strips made by Epistar or Huga chips, 5 lumens or more per LED, includingSMD 3528 led strips and SMD 5050 LED strips, standard length is 5 meters per reel, can be made into 1 meter, 2 meters, 3 meters too. Yellow PCB and White PCB available, non waterproof and waterproof ones available: 1- Non waterproof: without any waterproof protection materials covered. 2- IP 65 waterproof: with Epoxy Glue covered on the PCB and LEDs, 3- IP 67 waterproof: with Silicon tube Covered the whole LED strips, and sealed with cap at both ends. 4- IP 68 waterproof: with Silicon tube covered the whole LED strips, then insert Epoxy glue inside the silicon tube, sealed with cap at both ends. We use automatic SMT machine and automatic soldering machine for the production process, to ensure the production efficiency and quality, and offer 2 years of warranty time. LED strips can be cut every 3 LEDs. Connection: If you want to connect 2 reels or more reels together, the led strips can be connected with plugs in our factory. So, You only need to hook up the plugs together, and when you connect the led strips to the power supply, you have to hook the wires up to your 12V power source. One is indicated with a red stripe, for positive, and the other is all black for negative. You can easily connect multiple strips of any length together by plugging them in together with the quick disconnects. Architectural properties:Available light colors: *Warm white 3000K / 2700K / 2400K *White 5500K *Amber / Green / Blue / Red*Cuttable:Every 3LEDs *Beam angle:120° *Package length:5m Technical properties: *Driving current: 12Vdc *Power: 4.8w/meter(24w/roll) *Amount of leds: 300 ( 60led's/m ) *Led type: 335 side view single color SMD LEDs *LED dimension: 4.8x0.8x1.4mm *LED spacing: 16.6mm *3M self-adhesive tape on the back Order Numbers: ModelSize(MM)ColorMCD/LedLED Qty (LED/M)Input (V)Power (W/M)TC(K)/ WL(nm) CH-NW335Q60-WW5000*8*2Warm-white400060DC124.83500-4000K CH-NW335Q60-W5000*8*2White400060DC124.86000-6500K CH-NW335Q60-B5000*8*2Blue300060DC124.8460-475nm CH-NW335Q60-G5000*8*2Green500060DC124.8515-530nm CH-NW335Q60-Y5000*8*2Yellow250060DC124.8585-595nm CH-NW335Q60-R5000*8*2Red2500 60DC124.8615-630nm
Application: 1. Cove lighting 2. Architectural lights for canopy, corridor, window, archway 3. Backlight or edge lighting for signage 4. DIY lights for home use 5. Path and contour marking 6. Decorative lights for holiday, event, show, exhibition |